As an alternative to traditional hardwoods, bamboo wood flooring is a fast growing and trendy idea. It is quickly becoming the flooring choice for many contemporary homeowners. Bamboo flooring is naturally dent resistant and so wears extremely well.

What is interesting about bamboo is that it is not actually a wood, it is a fast-growing grass that has been used for centuries in building. Bamboo reaches maturity in 3 to 5 years and cutting the stalks after 3 does not harm the rest of the plant which makes bamboo a great renewable resource. Most other hardwoods take 50 to 100 years, bamboo never more than 5. Bamboo flooring is similar to oak in dent resistance with much more dimensional stability than other wood flooring types.

Bamboo flooring comes with both horizontal and vertical grain, it has a slightly different appearance than typical hardwood. Usually it is either a light golden color or a darker amber shade depending on the finish. The first is the bamboos natural color, the second is natural looking but achieved using a process called carbonization. Both are very attractive.

The installation of bamboo wood flooring is similar to traditional wood flooring. It can be nailed using a nail gun, glued to sub flooring, or floated, installed over plywood, OSB, particleboard, or over a properly installed radiant floor heating system. Bamboo flooring is manufactured at 6 to 9 percent moisture content so moisture equilibration is typically not required. Some installers report problems using regular floor nailers and instead use pneumatic nail guns.

If you’re looking for something different from your hardwood flooring, give bamboo a shot. The wood is rich and smooth and looks great in every type of home. Let your home start a new tradition with bamboo instead of oak or pine, go for something less common and stand out.

Perhaps it’s time for a remodel and updating of your home. How about a remodel that will transform your home, add lasting value, beauty and elegance, and be something you will be proud of? Think about hardwood flooring.

Generally hardwood floors come pre finished, this is when the manufacturer applies a finish at the factory. This finish is generally at least four coats of ultraviolet cured urethane resin. Hardwood floors are generally easy to clean with a simple sweep of a dust mop or vacuuming. You will need to protect your hardwood floors from scratches as much as possible. Putting protective rugs under your furniture is an excellent way to prevent scratches on the floor. Hardwood floors are meant to last a lifetime.

You will want to choose a color of hardwood floor that will accent your home and home furnishings. As a rule lighter colors go with country, contemporary and casual settings. Darker colored wood floors are for formal or traditional interiors. But, of course, anything goes! Your decision should be based on your visual preference.

Lighter wood would be a white ash, sugar maple or southern yellow pine. Darker colors are beech, birch, red oak, heart pine and mesquite.

You want to make sure that your hardwood floor will be able to withstand denting and wear. Of the woods mentioned above mesquite is the hardest wood, and a southern yellow pine would be the softest. In the middle of these fall the yellow birch, heart pine and beech.

If you are going to be hiring and contractor to install your hardwood floor make sure you ask for references. Go take a look at a floor that he has installed. Make sure that he is comfortable working with the type of word floor that you want installed.

Make sure that you thoroughly inspect the hardwood floor after the installation. Look at the floor from a standing position and with normal lighting. The finish on your floor will not be that you would find on fine furniture. Deep swirls or sander marks or splotchy areas may mean that the floor wasn’t finished properly. There will however be some irregularities on any wood floor. However, these irregularities won’t seem obvious and will only add to the character of the floor.